🔵 Car Parks
- Go slowly and keep left.
- Indicate when entering the car park.
- Be alert for pedestrians, reversing vehicles, and other hazards.
🔵 Dual-Lane Roundabouts
- Check both lanes before entering and throughout the roundabout.
- Use cover vehicles to help judge safe gaps.
- Stay in your lane.
- Always indicate left when exiting.
- Be aware of vehicles beside you.
🔵 Lane Changing
- Always know what is happening behind and beside you.
- Check your centre mirror first.
- Indicate and perform a clear blind spot/head check before moving.
- Make smooth movements—nothing sudden.
🔵 Merging
- Indicate when required.
- Check your centre mirror and blind spot before merging.
- Avoid merging when a vehicle is sitting beside you.
- Match the speed of traffic and merge smoothly.
🔵 Curbside Parking
- Indicate left before pulling over.
- Check your left blind spot before slowing and stopping.
- Before moving out, indicate right and check your right blind spot.
🔵 Right Turns
- Check your centre mirror before slowing.
- Move towards the centre of the road where appropriate.
- Do not cut corners.
- Stay on your side of the road and make a smooth, controlled turn.
🔵 Left Turns
- Keep left and maintain good lane positioning.
- Check your left blind spot, especially for cyclists and vehicles in bus/cycle lanes.
- Make sure the lane is clear before turning.
🔵 Dual-Lane Turns
- Stay in your lane throughout the turn.
- Know what is happening beside you.
- Avoid drifting into the adjacent lane or sitting in another vehicle's blind spot.
| | |
- Check both directions when approaching and proceeding through intersections.
- Be alert for emergency vehicles.
- Avoid stopping on bus lanes or cycle lanes.
- Be prepared for changing lights and make safe decisions.
🔵 Turning Bays
- Indicate before entering the turning bay.
- Check your blind spot before moving across.
- Merge into the bay smoothly--nothing sudden.
- Move fully into the turning bay before slowing down where appropriate.
🔵 Narrow Roads & Blind Corners
- Keep left and drive according to the road conditions.
- Indicate when passing parked vehicles if you need to cross the centre line.
- Be alert for oncoming vehicles around blind corners.
- Avoid creating bottlenecks.
🔵 Hazard Identification
- Keep scanning for cars, pedestrians, cyclists, animals, and other hazards.
- Remember that hazards can move into your path unexpectedly.
- Look well ahead and off the road.
- Adjust your speed and driving to the road and traffic conditions.
RSS Feed